Product Search
Search results for 'C-172'
Showing 41 - 61 of 563 Total Results
CA-0700
Location: Chase Air
The Chase Air Indicator from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Capping Compound *TEMPORARILY OUT OF STOCK*
CA-0100
Location: Capping Compound
Test Mark's Ultra-Strength Capping Compound is used to cap the ends of concrete test cylinders so compression force will be evenly distributed to the cylinder during testing.
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
CA-0791
Location: Min/Max Thermometers
This Digital Thermometer registers minimum and maximum temperatures in both Fahrenheit and Celsius. Temperature range is 32 to 122°F and 0 to 50°C. Large display shows humidity, temperature and time. Thermometer also serves as an alarm clock.
CA-0793
Location: Min/Max Thermometers
Eliminates all of the problems associated with mercury separation and air bubbles trapped in traditional thermometers. Weather resistant rugged plastic case for outdoor use. Displays three independent temperature readings of current, maximum and minimum since last reset.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams. . Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks...
CA-0360-P
Location: Slump Testing
Test Mark's plastic slump cones for concrete testing are more economical than metal cones and will not rust or dent.
Mortar Penetration Resistance Apparatus
CA-2830
Location: Mortar Penetration Resistance
The mortar penetration resistance apparatus from Test Mark Industries determines the time of setting of concrete by penetration resistance.
4" Test Cylinder Carrying Case
CA-0214
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 4x8 test cyliners for easier field to lab transfer with less specimen damage.
(3) options
Location: K-Type Digital Thermometer
Test Mark's pocket-sized thermometers accept Type K or J thermocouples with standard connectors, and provide accurate temperatures over an exceptionally wide range.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
(41) options
Location: Air Meter Replacement Parts
Concrete air/pressure meter replacement parts are available from Test Mark. Use our diagram to find the part you need for easy online ordering.
Curing Rack, 4" x 8" Cylinders 6/ctn
CA-0218
Location: Parts & Accessories
These durable racks are manufactured from plastic compounds and recycled materials to resist moisture, abrasion, chemical and temperature variations. Each rack has built-in handles, making them easy to carry and safely stacked 12 tiers (58") high. The racks unique open frame design allows water...
Curing Rack, 4" x 8" Cylinders 12/ctn
CA-0219
Location: Parts & Accessories
These durable racks are manufactured from plastic compounds and recycled materials to resist moisture, abrasion, chemical and temperature variations. Each rack has built-in handles, making them easy to carry and safely stacked 12 tiers (58") high. The racks unique open frame design allows water...
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
SA-1300
Location: Probe Rod
The Steel Probe Rod from Test Mark is used for locating soft zones in and under compacted areas in sub-grades and footing excavations.
Location: Parts & Accessories
Metric economical ANSI/ASTM Class 7 weight set includes a Statement of Accuracy from the manufacturer or an NIST Traceable Certificate - Test Mark Industries.
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
